How to Set Up a linksys WRT54GS Router

The WRT54GS wireless router is a model of the WRT54G Linksys router that is used in mainly home and consumer environments. You want share your internet connection with multiple computer using this type router then follow the given setup process. When the router will attach with your DSL line, you can connect your computers to the router.

If you want to setup linksys WRT54G2 wireless router with Comcast then follow my blog -How to Setup Linksys WRT54G2 Wireless Router with Comcast , which i have discussed in same blog.

Step1: Connect your computer to the router via Ethernet cable. Then turn on your computer and open your web browser put 192.168.2.1 in the address bar of your browser .It will access the router control panel.

Step2: Type admin for the password of the router, click ok and then click on setup then basic setup.

Step3: Select a static IP or a dynamic IP, depending on your particular network configuration.

Step4: Click on the save setting then go to the wireless section and then click on wireless settings.

Step5: Select the wireless mode which you want, along with what SSID you want for your wireless network.

Read More...

Call Us +1-855-517-2433 (Toll Free) 

How to Install a Linksys WAG200G

The Linksys WAG200G is a Wireless-G ADSL home gateway device that functions as both a wireless router and a DSL modem. The WAG200G features a line input and four Ethernet inputs in the back of the device. To install Linksys wag200g router follows the given steps:

If you want to reset admin password in linksys router then follow this article-How to Reset Admin Password in a Linksys Router.

Step1: Shut down all devices where you connect theLinksys WAG200G.

Step2: The WAG200G has a built-in DSL modem so, extra DSL modem is not necessary.

Step3: First, connect the yellow Ethernet cable included with the WAG200G to your computer's Ethernet port and connect the other end of the cable to one of the four ports on the back of the router/modem.

Step4: And then connect your DSL cable to the DSL port in the back of the WAG200G and connect the other end to the DSL wall jack.

Read More...

Call Us +1-855-517-2433 (Toll Free) 

How to Setup and Configuration in Linksys Router

linksys router is one of commonly used for business and home use. This brand comes by Cisco and as well as number of model of of wireless routers comes like cable routers. DSL routers. It is a very simple easy to setup. You don?t need to take help from any engineer to to perform this easy tasks. LinkSys router setup is common design for almost same for all . Below the picture

Linksys Router Setup: The Basic Configuration

You need to Follow this instructions 

First step you need to do router setting place in Linksys router in the middle location and you need to be careful always away from metal-surrounded environment

Connect the Ethernet cable into the Internet port on the behind of the linksys router. This port is generally placed at the Behind of the router.

Now your computer should be connected to the router and then you need connect one more Ethernet cable into the Ethernet port in your computer and attach the opposite end to one of the ports at the behind of the router.

Read More...

Call Us +1-855-517-2433 (Toll Free) 

How to Manually Upgrade Firmware of Linksys EA2700 Router

Firmware is a hardware version of your router designed to maintain its functionality, performance, security and reliability. When you say you have to upgrade firmware of your router, it means you will upgrade its hardware version.
Like others, your Linksys EA2700 router also has a firmware version that needs to be upgraded from time to time. Cisco releases firmware upgrades for all its products from time to time. Check out the steps given below and upgrade your router’s firmware:

Step1: Open your web browser and visit the Cisco website. Locate your Linksys model number’s details on the website and look for the firmware file (Cisco Connect Cloud). Make sure that you download the correct firmware file designed for Linksys EA2700 router. (See Also how to set up guest access in Linksys EA4500 router)

Step2: Save the file when prompted. Choose a location to save the file. Now extract the file’s contents by right-clicking on it and selecting Extract All. A new folder will appear in the same location. Remember, you will have to upload this file to upgrade the firmware. (See Also how to reset Linksys E1200 router)

Step3: When done, exit the browser window. Before you begin to upgrade, save your existing wireless configurations, otherwise these will be lost. You must log in to your Linksys router’s web interface to do so. Once you have backed up the settings, you can begin to upgrade its firmware.

Step4: Reopen your web browser and type ‘192.168.1.1’ in the address bar. Hit Enter to proceed. In the next screen, if prompted, enter your admin password to log in to the router. if you never set up a custom password, enter the default one. Once logged in, click the Administration tab and then click Manual Upgrade.

Step5: Click the Browse button to browse the file. Select and open the unzipped firmware file (and not the original zip file) and then click the Start Upgrade button. Ignore if any warning appears on the screen. Wait for the upgrade to complete. When prompted, restart your computer.

Step6: That’s it and your router’s firmware will be upgraded. This method can be applied to the entire Linksys EA series to upgrade the firmware. (See Also how to install a Linksys WAG200G gateway device)
 
Read more…

Call Us +1-855-517-2433 (Toll Free)

How to Set up a Linksys Wireless Router

Reason

LinkSys is a brand of computer networking products. Producing routers both wired and wireless. LinkSys is by far the most ubiquitous router in use for home users and offices. It's not always easy to set up a wireless router with a Windows client. Linksys routers come with a step-by-step Setup Wizard which makes setup and configuration easy to understand.

Solution

Set up a Linksys Wireless Router

 Attach the antennas to the Linksys wireless router.

 Place the router in a central location, making sure it's not surrounded by metal. (A signal can't be obtained through metal.) The router should be located so that the distance between clients (computers) is somewhat equal. This will create a better connection.

 Plug the Ethernet cable into the "Internet" port on the back of the Linksys router.

 Connect a computer to the router by plugging another Ethernet cable into the Ethernet port on your computer and attaching the other end to one of the available ports on the back of the router. You can choose any port except the one labeled "WAN."
  Plug the router into an electrical outlet.

Read More...

Call Us +1-855-517-2433 (Toll Free)